| Literature |
| Service |
| Dealers |
| Main page |
Technical - Installation
Table of contents
| System components | Using the system |
| Installation | Software & Firmware |
| Calibration | Scholarly |
| Troubleshooting & Service bulletins | External links |
| Planning & Execution | |
| Isolated ground installations (PDF) | Special considerations when installing on a boat with isolated ground. |
| Matryx & Magnum cutout (Full size - PDF 11x17) | Full-size layout for the Matryx and Magnum. |
| T2 setup guide (21k PDF) | Cookbook for setting up the T2 |
| Magnum quick start guide (PDF) | Cookbook for setting up the Magnum |
| Matryx quick start guide (PDF) | Cookbook for setting up the Matryx |
| The Q
interface (HTML) The 099DM1 story (PDF) |
The Q interface handles 1-off and specialized interface tasks. |
| Connecting Serial Ports (PDF) | Describes the use of USB serial ports and which ones are best. |
| NMEA distribution (PDF) | Discusses NMEA distribution on the Ockam system. Includes recommendations for setting up the interfaces involved. |
| Hints for Reducing RF Interference (PDF) | Steps to take for reducing radio frequency interferrence. |
| Drawings (118k zip) | Mechanical drawings of the displays and processors. |
| 033H Teeter-Todter compass files (1.7M Zip) | All the files needed to set up the Todter compass. |
| References | |
| Unisyn Release Notes (28k PDF) | Describes the changes to the latest version of the 001 processor. |
| Tag List (HTML) | Full list of the ASCII codes and their use as identifiers in the Ockam system. |
| Autocal applet w/examples (ZIP)(Cal page) | Application and example spreadsheet for doing autocals on an Ockam system. |
| OS4 Help file (HLP file) | Handy item for looking up configuration, errors, etc. |
| Sensor correction on the T1 (PDF) | How sensor correction tables are used on the T1. |
| T1 File Transfer Protocol (PDF) | Describes the file transfer protocol used to up and download files to the T1. |
| Onboard networking | |
| 051L LANbridge (HTML) | The LANbridge generates the UDP broadcast from any Ockam processor. |
| Setting up an onboard network (PDF) | Describes Ethernet and the various components thereof. Includes do's and don'ts. |
| Install .NET framework (for Vysion setup) (LINK) | Windows .NET is a prerequisite for Vysion setup tools. |
| IP scanner tool (ZIP file) | Lets you see all the hosts on your network |
| VNC viewer (Setup file 647kB) | VNC viewer which will become part of our PC-based components (like Vysion). This tool lets you access the underlying operating system for maintainance. |
| WireShark net monitor (Link) | Handy tool for viewing all traffic on your your local Ethernet. |