Sailing at a higher level
Remote control
Remote control uses User Output syntax on tag '@'.

Magnum & Matryx
aka 'Jumbo'

Syntax: U@=JNumberCommand[Arg(s)]
Number (1 to 15) defines the display address.
Cmd Function Args
M Set Menu
(Magnum only)		 1 to 15
S Set selection 1 to 15
+ (increment)
- (decrement)
T (Top)
B (Bottom)
T Display tag
Magnum, only 1
Matryx up to 4		 Tag list
D Display text text
L Set light Level 0 to 9
Example: U@=J1S+ advances Jumbo #1 to next page/menu item.

Lynx Remote

Syntax: U@=LNumberCommand[Arg(s)]
Number (1 to 16) defines the Lynx address.
Cmd Function Args
A Change address
Must send twice.		 1 to 16
B Read out cmd
LnBmcTag		 m button #
c command #
Replies on Tag
C Set button cmd
LnCmCmd
LnCm+Cmd		 m button #
sets Cmd
appends Cmd
D Debug
Dtag		 Repeat commands on tag
V Send version
LnVtag		 Send version on tag
Z Flash the light
LnZdur		 Flash light for dur .1 sec
Example: U@=L1CU@=J1S+ sets Lynx 1 button 1 to advance Jumbo 1 to next page/menu item.

Software

Syntax: U@=OSlotCommand
Slot (1 to 16) specifies the software application.

OS4 Racecourse uses Slot=1
Cmd Function
O1N Advance to next leg
O1P or O1P0
O1P1
O1P2		 Ping closest mark
Ping origin mark
Ping pin
Example: U@=O1S switches Racecourse to the next leg.

OS4 Logging uses Slot=2
Cmd Function
O2L0
O2L1		 Turn off logging
Turn on logging
O2Ctext Log comment text
If log is off, turns it on
Other software applications can use slots 5 thru 16.

Back to mobile main.