| Root |
| Power |
| Ockam bus |
| Functional |
| Display |
| Configuration |
| Errors |
Return to
Main Page
Main Page
T1 Status (Status1)
There are many informational items that have a slow rate of change - the date for instance. The T1 processor outputs these items round-robin on tag " ". The format is id<colon>value.
| Axx: | Current value of the Averages (A00=boatspeed,...). |
| BU: | Percentage of Ockam Bus being used. |
| BN: | Boat name. Set with Option 30. |
| BP: | Available mailboxes (system resource). |
| BT: | Current CalBt AutoCal value (or ‘off’). |
| C1: | Percentage of COM1: being used (system resource). |
| CP: | Percentage of the processor being used (system resource). |
| DA: | Local date (see Set Time and Set UTC Offset). |
| DS: | T1 dip switches (the DIP switches on the panel). |
| DT: | List of disabled tags (see Disabling Tags). |
| GB: | GPS port baud rate. |
| GP: | GPS flags: 8=Manual Wpt, 32=Manual Current, 256=Have Lat/Lon, 512=Have Waypoint, 1024=Have Cog/Sog. |
| Kxx: | Current value of the Calibrations. |
| LE: | Current CalLee AutoCal value (or ‘off’). |
| LG: | Current log file (see Built-in logging). |
| Oxx: | Current value of the Options. |
| PL: | Name of the polar file in use. |
| RV: | Software revision, e.g. “20.03”. |
| SY: | Code build: 0=Retail, 1=Debug, 2=AHRS, 4=Quad Serial |
| TZ: | Offset to local time zone in minutes (see Set UTC Offset). |
| UM: | Units of measure (See Units of Measure). |
| UW: | Current CalUW AutoCal value (or ‘off’ if disabled or 'n/a' if no table is loaded). |
| VA: | Current CalVa AutoCal value (or ‘off’ if disabled or 'n/a' if no table is loaded). |
| VS: | Current CalVs AutoCal value (or ‘off’ if disabled or 'n/a' if no table is loaded). |
| VT: | Current CalVt AutoCal value (or ‘off’ if disabled or 'n/a' if no table is loaded). |